Skin Friendly FFP2 Face Mask Low Breath Resistance High Filtration Efficiency

Descriptions

FFP2 Dust Mask with non-woven/elasticated strap ,fold flat dust mask ,convenience take. The internal nosepiece is made of velvet/sponge double-layer. There are no exposed metal components; the external nosepiece used to adjust the mask on the face is metal coated. Structure and materials are long lasting and avoid the collapse in humid environments.

4 Ply Protect your life safety

1st layer: skin friendly non-woven fabric

2nd layer: Anti-fracture filter cotton
3rd layer: Melt blown fabric
4th layer: skin friendly non-woven fabric

Specifications

Application

Non-woven mask for disposable goods, convenient use, and make relevant purification treatment, can be used for food. The medical, pharmaceutical, electronics.Textiles. Clean room operators, but also to do dailyactivities using other industry. The mask has been sterilized in the production process.

Directions for use

• The mask is for single use only.
• The mask should not be removed from its packaging until its required for use.
• Use the respirator in accordance with applicable health and safety regulations.
• Fit the respirator and check leak-tightness before entering the contaminated area.
• Wear the respirator for the whole duration of exposure to contaminants.It should not be used for more than 8 hours continuously and should be discarded after use.
• Transport and stockage of unused masks should be such that the product is not stored in direct sunlight and in frost free conditions,not in contact with solvents and cannot be damaged by physical contact with hard surfaces/items.
• As required by European Health and Safety requirements,the user is advised that when the mask is in contact with the wearer’s skin,it may cause allergic reaction to susceptible individuals.If this is the case,leave the hazard area,remove the mask and seek doctor’s advice.​

Products Image Display